Broshing paste for soft and composite materials: 3/0 GTB PONCE

€8.90
VAT included
Stock : 64
    Dim : 2104540 mm
64
Quantity

The 3/0 GTB PONCE polishing paste is required for the preparation of a wide range of materials (wood and soft materials). The 3/0 GTB PONCE paste has a good cut to remove saw marks. This paste is to be used first then switch to YELLOW W3 then BRIL 795

Paste made in France (Thiers) by Mécapolior.

Contains animal fats

Use: preparation work with a good cut

Materials concerned: wood and soft material

Color: Grey

Weight: around 0.8kg

Composition: aluminum oxide and pumice, refined beef tallow, stearin and paraffin

Texture: Very oily, very strong adhesion and very messy on the support, very poor resistance to heat.

Supports: sisal and stiff cotton

Pumice: Commonly known as a pumice stone. It is an extremely porous volcanic rock with a very low density (floats on water). This rock is often used to rasp calluses from the feet.

What are polishing, brushing and polishing pastes?

·       Polishing pastes: reduce large marks related to the machining of materials

·       Brush paste: preparation for shine before polishing

·       Polishing paste: finishing action to make it shine, for example.

Secure shipments for everyone: Sold in loaves of less than one kilo allowing it to be used by professionals and individuals alike. The loaves are sold in their original mould, ensuring secure shipping.

Application advice: this polishing paste is very greasy, it is applied with light pressure. The rotation of the disc will heat the bread and soften it in order to deposit a film on the disc.

A trusted partner: Mécapolior has been manufacturing in France for 30 years, polishing pastes studied for each phase of work, from preparation to finishing and even super finishing.

3/0GTBPONCE
64 Items

Data sheet

Largeur
45
Epaisseur
40
Longueur
210
_type
bloc
_unique
Non
_ebp
PM3/0GTBPONCE
Color
Gris

Specific References

Related Products ( 8 other products in the same category )

Super finish polishing paste for steel : ECLINOX BLANCHE

Stock : 65
    Dim : 2104540 mm
Eclinox white polishing paste is required for finishing a steel  of materials. The ECLINOX BLANCHE paste has a very good shine and little...
Price €10.20

Polishing paste for metals: 220CBN2

Stock : 38
    Dim : 2104540 mm
The 220CB2 polishing paste h as a high cutting power in order to remove the lines of bruises for steels and stainless steel. Start with 220CBN2,...
Price €6.70

Polishing paste for resin-based materials: BRIL 795

Stock : 64
    Dim : 2104540 mm
BRIL 795 polishing paste is required for finishing acrylic, resin and carbon glass. It has a little cut and a good shine. Start with the...
Price €10.20

Polishing paste for wood: ECLINOX WOOD

Stock : 58
    Dim : 2104540 mm
ECLINOX WOOD polishing paste is specially designed for finishing wood . ECLINOX WOOD paste has low cut and good shine . Start with COMPO PONCE,...
Price €10.20

Polishing paste for wood: RENFORCE WHITE

Stock : 63
    Dim : 2104540 mm
BLANCE REINFORCE polishing paste is designed for the super finishing of soft materials . The WHITE REINFORCED paste has a good shine. Start...
Price €10.20

Polishing paste for metals: ECLINOX ROSE

Stock : 36
    Dim : 2104540 mm
The best polishing paste for metals, mirror polished! ECLINOX ROSE polishing paste is required for the super finishing of metals ....
Price €33.20

Brushing paste for metals: ROUGE DH1

Stock : 26
    Dim : 2104540 mm
The Rouge D1H polishing paste has a good cutting power in order to prepare shine for metals . Start with 220CBN2, then ROUGE DH1 for the gloss...
Price €8.90

Universal brush paste: COMPO PONCE

Stock : 33
    Dim : 2104540 mm
COMPO PONCE brush paste is required for the preparation of a wide range of materials (steel, stainless steel, wood and soft materials). COMPO...
Price €8.90
  • Register

New Account Register

Already have an account?
Log in instead Or Reset password