The Lockers of World relay are not accounting with the steel bars!
Steel 1095 is a carbon steel with one large cutting capacity. It is a steel a must in cutlery because it is easy to sharpen. It's a steel economic and high quality offers great flexibility in his handling. It is possible to make damas steel by combining it with 15N20. Sold: laminated, decapitated and annealed.
All our steels are delivered to flat and relaxed (This allows reduce wear during heat treatment)
The Lockers of World relay are not accounting with the steel bars!
Steel 1095 is a carbon steel with one large cutting capacity. It is a steel a must in cutlery because it is easy to sharpen. It's a steel economic and high quality offers great flexibility in his handling. It is possible to make damas steel by combining it with 15N20. Sold: laminated, decapitated and annealed.
All our steels are delivered to flat and relaxed (This allows reduce wear during heat treatment)
Country of manufacture: United Kingdom
Uses: Knife blades and very well for selective soaking
Chemical composition:
| Carbon (C) | Manganese, Mn | Phosphorus (P) | Suffer (S) |
| 0.9 - 1.03% | 0.3 – 0.5% | 0.03% | 0.05% |
Thermal treatment:
- Trempe at 800 – 830°C / then 1 minute in oil or water (recommended oil)
- Revenue for 2 hours at 200°C for 63HRc
- Revenue for 2 hours at 230°C for 62 HRc
Dimensions possible on order:
Max length: 10 to 600 mm
Width: 30, 40, 50, 75, 100 and 150 mm
Thickness: 2.3, 3.5, 4.5, 5.5 and 6.5 mm
Franck G. 
compliant (Translated review)
Jean Marie T. Very good (Translated review)
Bruno F. 
great quality (Translated review)
Bruno F. great quality
Thomas C. Square (Translated review)
Thierry K. well packaged and fast shipping (Translated review)
Thierry K. well packaged and fast shipping
